Sensoro

Mocheso o Phahameng oa Mocheso oa Phekolo ea Khase ea Phapang ea Khatello ea Sensor

Tlhaloso

Sensor ea khatello ea letoto la D-S0140 ke sensor ea khatello e fapaneng e thehiloeng ho silicon piezoresistive effect, e sebelisoang ho sebelisa theknoloji e nyalisitsoeng ea CMOS le MEMS. Khatello e lokelang ho lekanyetsoa e kenngoa filiming ea silicon ho tloha ka morao ho chip, e lumellang sensor hore e sebelisoe libakeng tse thata. Sensor ea khatello e hlahisa lets'oao la motlakase le lekanang ka mokhoa o lekanang le khatello, 'me e fana ka tlhahiso e nepahetseng le e tsitsitseng ea mats'oao le matšeliso a mocheso.

Iteanye le rona

lintlha tsa sehlahisoa

tlhaloso2

Sebopeho

• Botsitso bo phahameng le ho tšepahala

• Karabelo e potlakileng

• Boemo ba mocheso oa ho sebetsa -40°C ho ea ho +135°C

• Boemo ba khatello ea ho sebetsa -1.7 ~ +34.5kPa (khatello ea gauge)

• Thekenoloji ea CMOS le theknoloji e nyalisitsoeng ea MEMS

• PBT+30%GF lisebelisoa tsa khetla

• Latela Taelo ya RoHS

Etsa kopo

• Yuniti ea sefe ea disele ea DPF

Thepa ea inductive

Khang	Maemo
Mocheso oa ho sebetsa	-40 ℃ ~ +135 ℃
Mocheso oa polokelo	-40 ℃ ~ +135 ℃
Mokhoa oa ho sebetsa	khase ea ail
Khatello ea ho sebetsa	(-1.7) ~ 34.5kPa (gauge)
Khatello e feteletseng	300kPa(g)
Khatello e robehileng	450kPa (g) (Ha sensor e tlas'a khatello ea ho hlōleha, kutlo ha e hlokehe hore e khone ho khutlela sebakeng se tloaelehileng sa ho sebetsa, empa sensor ha ea lokela ho senya le ho tsoa tlas'a khatello ea ho hlōleha)
Mounting Angle	+/-30 ° (Angle ea ho kenya e amanang le boemo bo otlolohileng (sheba litšoantšo)
Matla a phepelo (Vcc)	5.0±0.25V
Phepelo ea hajoale	10mA MAX
Tšireletso ea overvoltage	16V
Ho nepahala ho tloaelehileng ha mocheso	±1.2%Vcc @ 25℃
Kakaretso ea sehlopha sa liphoso	± 2% Vcc (phoso e hlahisoang e kenyelletsa phoso ea hysteresis, phoso ea ho pheta-pheta, phoso ea linearity le phoso ea bophelo)
Nako ea ho arabela	2ms MAX

Litekanyo tsa mechine

Lintho tse bonahalang tsa khetla: PBT+30% GF

Khokahano: TYCO FEP1J0973703

Ponahalo, boholo le lisebelisoa tsa sensor li lokela ho latela litšoantšo.

Teko ea tikoloho le litekanyetso tsa ho tšepahala

Nomoro	Ntho ea Teko	Maemo a Teko	Litlhoko tsa Ts'ebetso
1	Khatello e feteletseng	Khatello e feteletseng:300kPa(g) Nako ea khatello: 5min Mocheso oa teko: 20-25 ℃	Kamora hore sensor e khutlisetsoe ts'ebetsong e tloaelehileng, e lumellana le litšobotsi.
2	Khatello ea timetso	Khatello ea ho phatloha: 450kPa(g) Nako ea khatello: 1min Mocheso oa teko: 20-25 ℃	Ha sensor e tlas'a khatello ea ho hlōleha, kutlo ha e hlokehe hore e khone ho khutlela sebakeng se tloaelehileng sa ho sebetsa, empa mochine o ke ke oa senyeha 'me oa lutla tlas'a khatello ea ho hlōleha.
3	Potoloho ea mocheso oa khatello	mocheso oa potoloho ea hae ke -40 ℃ ~ 135 ℃ Potoloho ea khatello ke -1.7 ~ 34.5kPa Tšoara 84h 'me u boloke lihora tse 0.5 sebakeng se seng le se seng sa moeli oa khatello le ntlha ea mocheso	Li-sensor tsohle li lokela ho fihlela litlhoko tsa ho nepahala kamora tlhahlobo 'me ha hoa lokela ho ba le ho lutla.
4	Ho boloka mocheso o tlase	Mocheso oa teko: -40 ℃ Nako ea teko: lihora tse 72	Li-sensor tsohle li lokela ho fihlela litlhoko tsa ho nepahala kamora tlhahlobo 'me ha hoa lokela ho ba le ho lutla.
5	Ho boloka mocheso o phahameng	Mocheso oa teko: 135 ℃ Nako ea teko: lihora tse 72	Li-sensor tsohle li lokela ho fihlela litlhoko tsa ho nepahala kamora tlhahlobo 'me ha hoa lokela ho ba le ho lutla.
6	Thermal Shock	Mocheso o tlase: -40 ℃ Mocheso o phahameng: 135 ℃ Palo ea li-cycle: 500 Cycles Ho boloka nako bakeng sa ntlha ka 'ngoe ea mocheso: 1 hora Sensor ha e sebetse nakong ea teko.	Li-sensor tsohle li lokela ho fihlela litlhoko tsa ho nepahala kamora tlhahlobo 'me ha hoa lokela ho ba le ho lutla.
7	Potoloho ea mocheso le mongobo	Kamore ea mongobo e nang le mocheso oa pele oa +23 ℃ le mongobo oa pele oa HR83% o futhumetse ho +40 ℃ nakong ea 5h, 'me mongobo o nyolohetse ho HR92%,' me o bolokoa bakeng sa 12h; Kamora 5h, mocheso o theohetse ho +23 ℃, 'me mongobo e ne e le HR83% bakeng sa 2h. Ts'ebetso e kaholimo e phetoa makhetlo a 21 bakeng sa 504h. Sensor ha e sebelisoe nakong ea teko.	Li-sensor tsohle li lokela ho fihlela litlhoko tsa ho nepahala kamora tlhahlobo 'me ha hoa lokela ho ba le ho lutla.
8	Teko ea ho tšoarella	Potoloho ea khatello ka mocheso o phahameng 110 +/-5℃ : ho tloha -1.7kPa ho ea ho 34.5kPa, khafetsa ke 0.5Hz; Palo ea lipotoloho ke limilione tse 2. Sensor ha e sebelisoe nakong ea teko.	Li-sensor tsohle li lokela ho fihlela litlhoko tsa ho nepahala kamora tlhahlobo 'me ha hoa lokela ho ba le ho lutla.
9	Teko ea ho lumellana ha metsi	Sensor e hokahane le lehare la motlakase 'me ho sebelisoa matla a 5V. Li-reagents tse 'nè setšoantšong se ka tlase li lekoa ka thoko. Mokhoa oa teko: Lahlela marotholi a 5-10 a reagent holim'a sebopeho sa khatello ea sensor joalo ka ha ho bonts'itsoe setšoantšong se latelang. (Tsela e kenang moeeng e ea holimo), ebe sensor e kenngoa ka lebokoseng la mocheso ho 100 ° C bakeng sa lihora tse peli. Ka mor'a ho hlatsoa, pheta tlhahlobo le li-reagents tse ling tse tharo. nomoro Mofuta oa teko ea bongata 1 disele 5 marotholi 2 Oli ea enjene marotholi a 10 3 peterole marotholi a 10 4 glycol marotholi a 10	Li-sensor tsohle li lokela ho fihlela litlhoko tsa ho nepahala ka mor'a tlhahlobo